JobStep Safety

Written safety program · PDF and Word

Construction safety manual, built for your company in 5 minutes

Your general contractor wants your written safety program by Friday. Answer about 20 questions and get a safety manual with your company name, your trades, and only the hazard programs your crews need, each one with the OSHA construction rules quoted word for word. Built from your answers, ready the moment you pay.

  • 16 sections every company needs
  • 20 hazard programs, only the ones you need
  • 13 forms ready to print
  • Editable Word file and a PDF

Custom Safety Manual

$79

One payment, no subscription. Yours to keep and edit.

Build your manual
  • Secure checkout by Stripe
  • Instant download, links also sent by email
  • Not right for you? Refund within 14 days

How it works

Three steps, about five minutes

1. Answer about 20 questions

Company name, who signs the policy, your trades, and yes, no or not sure for each kind of work. About 5 minutes.

2. See what goes in

Before you pay, the last screen lists every hazard program your answers add.

3. Download it right away

Your manual as a PDF and an editable Word file, the moment you pay.

What is inside

The program every company needs, plus the ones your work needs

In every manual

  • Safety Policy Statement
  • How to Use This Manual
  • Responsibilities
  • New Hire and New-to-Site Orientation
  • Job Hazard Analysis and Pre-Task Planning
  • Site Inspections
  • Stop Work Authority
  • Reporting Injuries, Illnesses, Near Misses and Hazards
  • Emergencies, First Aid and Fire
  • After an Injury or Close Call: Investigation and Corrective Action
  • OSHA Reporting and Injury Records
  • Training
  • Toolbox Talks
  • Subcontractors and Multi-Employer Sites
  • Safety Rules and Enforcement
  • Program Review

Hazard programs, added by your answers

  • Fall Protection Program
  • Roof Work
  • Ladders
  • Scaffolds
  • Aerial Lifts
  • Excavation and Trenching
  • Electrical Safety
  • Hand and Power Tools
  • Personal Protective Equipment (every manual)
  • Hearing Conservation
  • Demolition
  • Hazard Communication Program
  • Respiratory Protection Program
  • Silica Exposure Control Plan
  • Hot Work and Fire Prevention
  • Heavy Equipment and Vehicles
  • Cranes and Hoisting
  • Confined Spaces
  • Work In and Next to Roads
  • Heat and Cold

Forms, ready to print

  • Orientation Checklist
  • Site Inspection Checklist
  • Training Record Log
  • Competent Person Designation
  • Stop Work Log
  • Emergency Contacts and Directions
  • Near Miss and Hazard Report
  • Toolbox Talk Sign-In
  • Safety Manual Acknowledgment
  • Fall Protection Training Certification Record
  • Job Hazard Analysis Field Form
  • Pre-Task Plan (PTP)
  • Incident Report Form

Why it is built this way

A manual your crews will actually use

Your company, not a template

Your name, owner, safety contact, trades and state print where they belong.

Only programs for your work

A roofer gets fall protection and roof rules. A concrete crew gets the silica plan. Nobody gets 40 pages they will never use.

Every rule quoted

Each legal rule prints in plain words, with the exact words of the standard and its citation underneath.

Nothing guessed

Site facts only you know are blank lines, all listed on the first pages so you can finish it in one sitting.

Custom Safety Manual: Cover with your company details
Cover with your company details. Sample company.
Custom Safety Manual: Details to complete, all on one page
Details to complete, all on one page. Sample company.
Custom Safety Manual: A hazard program with the rules quoted
A hazard program with the rules quoted. Sample company.

What OSHA expects from a construction company

The construction rules put the program on the employer: start it, keep it running, and inspect the work.

“It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part.”

OSHA's own guide for construction programs says it plainly: employers in construction must have a program that includes measures to detect and correct workplace hazards. [OSHA] And three standards ask for a specific written program when your work triggers them:

  • Hazard communication, when crews use hazardous chemicals: a written hazard communication program. [OSHA]
  • Respiratory protection, when respirators are needed or required: a written program with worksite-specific procedures. [OSHA]
  • Silica, when crews cut, grind or drill concrete, masonry or stone: a written exposure control plan. [OSHA]

The manual includes each of these programs when your answers call for it.

Sources

Questions

Common questions, short answers

Something not covered here? Email help@jobstepsafety.com and we will answer.

Ready when you are

$79, one payment. Built from your answers.

Build your manual
  • Instant download after checkout
  • Refund within 14 days
  • Secure checkout by Stripe
Does OSHA require a written safety program?

The construction rules require every employer to start and keep up the programs needed to comply, with frequent and regular site inspections by competent persons (29 CFR 1926.20(b)). Some standards also require a specific written program when your work triggers them: hazard communication when crews use hazardous chemicals, respiratory protection when respirators are required, and an exposure control plan for silica tasks. The manual includes those written programs when your answers call for them. General contractors and prequalification services often ask for a written safety manual too.

How is this different from a free template?

A template is someone else's manual with the name taken out. This one is built from your answers: your company name, owner and safety contact print where they belong, your trades and state are in it, and it includes only the hazard programs for work you do. Every rule is quoted word for word from the OSHA standard with its citation. Facts only you know, such as the nearest clinic for a site, are left as lines to fill in and listed on the first pages, so nothing is guessed.

What if I am not sure whether we do some kind of work?

Answer "Not sure" and the program is included. It is easier to delete a program you do not need than to find out you were missing one.

Will my general contractor or prequalification service accept it?

We cannot promise what a reviewer will accept: each one sets its own checklist. The manual covers what reviewers commonly look for (policy, responsibilities, training, inspections, incident reporting, emergency procedures and the hazard programs for your work), and the Word file is yours to change if a reviewer asks for something different.

Which states can I order for?

The 29 states where federal OSHA covers private employers. The 21 states that run their own OSHA plan for private employers are not offered yet, because their rules can differ.

What do I get, and how fast?

A PDF to print and an editable Word file, ready to download the moment you pay. The links are emailed too and keep working.

Can I change it later?

Yes. Edit the Word file whenever your work changes. The manual tells you to review it every year, after any serious incident, and before you start a new kind of work.

Is this a subscription?

No. One payment. If it is not right for you, email us within 14 days for a full refund.

Have the manual ready before the GC asks

Build your manual, $79