What counts as working alone
Working alone is not only about being the only person on site. It is about whether help would come quickly if something went wrong. British Columbia's definition is the one most provinces echo:
“"to work alone or in isolation" means to work in circumstances where assistance would not be readily available to the worker”
On a construction or service crew that includes the person finishing a job after everyone else has left, the worker in a separate building or out of earshot of the crew, the driver between sites, and the owner who goes back to the shop at night.
Working alone rules by province and territory
A summary of what each regulation says. Below the table, each one in its own words with the citation, so you can check it. Quebec and federally regulated workplaces are not covered.
| Province or territory | Written procedure in the text? |
|---|---|
| British Columbia | Yes |
| Alberta | Not required by the text |
| Saskatchewan | Not required by the text |
| Manitoba | Procedures, posted |
| Ontario | No general duty found |
| New Brunswick | Yes (code of practice) |
| Nova Scotia | No general duty found |
| Prince Edward Island | Yes |
| Newfoundland and Labrador | Yes |
| Yukon | No general duty found |
| Northwest Territories | Not required by the text |
| Nunavut | Not required by the text |
British Columbia
Before work alone or in isolation, identify the hazards and remove or reduce them. Put the well-being checks in writing: the time between checks, the person who makes and records them, one more check when the shift ends, and the plan (rescue included) for when the worker does not answer. Develop it with the joint committee or representative and the worker, and train both the worker and the person who checks.
“The employer must develop and implement a written procedure for checking the well-being of a worker assigned to work alone or in isolation.”
Alberta
Working alone is a hazard to assess like any other. The employer provides an effective communication system (radio, phone or other electronic means) with regular contact at intervals that suit the hazard, or visits or call-ins where electronic contact is not practicable.
“An employer must, for any worker working alone, provide an effective communication system consisting of (a) radio communication, (b) landline or cellular telephone communication, or (c) some other effective means of electronic communication that includes regular contact by the employer or designate at intervals appropriate to the nature of the hazard associated with the worker's work.”
Saskatchewan
Look at the risks of working alone or at an isolated place together with the committee, representative or workers, take the practicable steps to remove or reduce them, and give the worker a reliable way to communicate.
“must include the establishment of an effective communication system that consists of: (i) radio communication; (ii) phone or cellular phone communication; or (iii) any other means that provides effective communication in view of the risks involved”
Manitoba
Work out the risks together with the committee, representative or workers. Set safe work procedures that include an effective way to stay in contact, make sure workers are trained in them and that a copy is posted, and look at them again at least every three years, or sooner when the work changes.
“An employer must review and revise the procedures not less than every three years or sooner if circumstances at a workplace change”
Ontario
No general working alone regulation was found in the Act or the construction, industrial or health care regulations. The construction rules that were found are task specific, such as trenches, where another worker must be above ground nearby.
Searched for this page: the general safety regulations listed in our kit. General duty provisions still apply, and other rules may cover specific tasks.
New Brunswick
The employer establishes a code of practice for anyone who works alone at any time, provides the equipment it calls for, makes sure it is followed, and trains each lone worker and their supervisor.
“An employer shall establish a code of practice to ensure, so far as is reasonably practicable, the health and safety of an employee who works alone at any time”
Nova Scotia
No general working alone duty was found in the general safety regulations searched. The one rule found covers a person working alone near water who is at risk of drowning.
Searched for this page: the general safety regulations listed in our kit. General duty provisions still apply, and other rules may cover specific tasks.
Prince Edward Island
Where the only worker at a workplace works without help readily available, the employer has written procedures that list the workplace and employer details, the risks and the steps to reduce them, how often checks happen and who makes and records them, the plan for an unanswered check, and a final check when the shift is over. Train the workers and supervisors and keep a copy for an officer.
“Where a worker is working alone, the employer shall develop and implement written procedures”
Newfoundland and Labrador
Assess the risk, control the hazards, and have a written procedure for checking on the worker: interval, what to do if there is no contact, emergency response, and a designated contact who records each check. Develop it with the worker and the committee or representative and review it at least annually.
“An employer shall develop and implement a written procedure for checking the well-being of a worker assigned to work alone or in isolation.”
Yukon
No general working alone duty was found in the regulations. The one rule found is narrow: in a forestry operation, someone running a chain saw may not be on their own.
Searched for this page: the general safety regulations listed in our kit. General duty provisions still apply, and other rules may cover specific tasks.
Northwest Territories
Before anyone works alone or at an isolated site, the employer and the committee, representative or workers look at the hazards together. The employer then takes reasonable measures against them, one of which is a communication system that works.
“If a worker is required or permitted to work alone or at an isolated work site, an employer, in consultation with the Committee or representative”
Nunavut
Worded the same as the Northwest Territories rule: hazards are reviewed together with the committee, representative or workers, and the employer takes reasonable measures, among them a communication system that works.
“If a worker is required or permitted to work alone or at an isolated work site, an employer, in consultation with the Committee or representative”
The seven parts of a working alone procedure
The provinces with the most detailed rules (British Columbia, Prince Edward Island, Newfoundland and Labrador) ask for much the same things. A procedure that covers these seven parts meets most of them:
- Who and where. Your company and the workplace, with addresses and phone numbers, and what work is done there.
- When someone works alone. The jobs, shifts and situations it covers.
- Hazards and controls. What could go wrong on each of those jobs, and what you do to remove or reduce it.
- How you stay in contact. Phone, radio, satellite device or visits, tested where the work happens.
- Check-ins. How often, who makes and records each check, and a check at the end of the shift.
- When a check is missed. Who tries again, who goes to look, and when you call for emergency help.
- Training and review. Who is trained (the worker and the checker), who helped write it, and when it is reviewed.
Setting check-in times
No regulation gives a single number. The rule of thumb in the texts is that the interval should suit the hazard: the riskier the work, the shorter the gap. Decide it with the worker, write it into the procedure, and add an end-of-shift check every time. A missed end-of-shift check should start the same steps as any other missed check.
Test the contact method before you rely on it. A phone with no signal at the bottom of a lift shaft or on a remote road is not a contact method. Where two-way contact is not possible, a device that sends an alarm when the worker does not reset it is better than nothing.
Safety tips for people who work alone
- Tell your contact where you are going and when you expect to finish, every time.
- Keep your phone or radio charged and on you, not in the truck.
- Leave high-risk tasks (heights, confined spaces, live electrical work) for when someone else is there.
- If the job changes from what was planned, check in before you carry on.
- Know the address and the way to the nearest hospital before you start.
Questions
Common questions
Is working alone allowed in Canada?
Yes. None of the regulations quoted on this page bans working alone in general. Most of them require the employer to look at the risks first and to have a way to stay in contact. A few tasks have their own rules, such as trench work in Ontario or chain saw work in Yukon forestry operations.
Do I need a written working alone policy?
In British Columbia, Prince Edward Island and Newfoundland and Labrador, the regulation says the procedure is written. New Brunswick requires a code of practice and Manitoba requires procedures that are posted. Elsewhere the text does not require a written document, but writing it down is the simplest way to show you assessed the risk and set up contact.
How often should someone working alone check in?
Often enough for the risk of the job. The higher the risk, the shorter the gap between checks, and always a check at the end of the shift. Set the interval with the worker who will do the job.
Who can be the designated contact?
Anyone who will reliably make or take the check at the agreed times, knows what to do when a check is missed, and has been trained in the procedure: a supervisor, a dispatcher, a co-worker on another site or a monitoring service.
Does this cover Quebec or federal workplaces?
No. This page and the kit cover the other nine provinces and three territories. Quebec and federally regulated workplaces have their own rules.